[Pacemaker] Fence_pcmk hangs

Brendan Regan bregan at paragusit.com
Mon Nov 21 02:42:34 UTC 2011


Hi Andrew,

Thanks, that took care of the problem.

Brendan



On 11/20/11 8:03 PM, "Andrew Beekhof" <andrew at beekhof.net> wrote:

>On Mon, Nov 21, 2011 at 10:14 AM, Brendan Regan <bregan at paragusit.com>
>wrote:
>>
>>  Hi Andrew,
>>
>> I originally encountered the problem when I ran ccs_update_schema -f -v
>>it
>> hangs when it gets to fence_pcmk
>>
>> Generating resource-agents cache
>>  ras: checking required files
>>  ras: cannot find rng files. Creating stubs
>> Generating fence-agents cache
>>  fas: checking required files
>>  fas: looking for agents
>>  fas: generating hashes
>>  fas: generating new cache
>>  fas: processing fence_ack_manual
>>  fas: processing fence_alom
>>  fas: processing fence_apc
>>  fas: processing fence_apc_snmp
>>  fas: processing fence_baytech
>>  fas: processing fence_bladecenter
>>  fas: processing fence_brocade
>>  fas: processing fence_bullpap
>>  fas: processing fence_cisco_mds
>>  fas: processing fence_cisco_ucs
>>  fas: processing fence_cpint
>>  fas: processing fence_drac
>>  fas: processing fence_drac5
>>  fas: processing fence_eaton_snmp
>>  fas: processing fence_egenera
>>  fas: processing fence_eps
>>  fas: processing fence_ibmblade
>>  fas: processing fence_ifmib
>>  fas: processing fence_ilo
>>  fas: processing fence_ilo_mp
>>  fas: processing fence_intelmodular
>>  fas: processing fence_ipmilan
>>  fas: processing fence_ldom
>>  fas: processing fence_lpar
>>  fas: processing fence_mcdata
>>  fas: processing fence_na
>>  fas: processing fence_pcmk
>>
>> Same thing happens when I run ccs_config_validate -v
>>
>>
>> Creating temporary file: /tmp/tmp.oqBpCC5SEx
>> Config interface set to: xmlconfig:cmanpreconfig
>> Configuration stored in temporary file
>> Updating relaxng schema
>>
>>
>>
>> /etc/cluster/cluster.conf
>> <?xml version="1.0"?>
>> <cluster config_version="1" name="GenSAN">
>>  <logging debug="off"/>
>>  <clusternodes>
>>    <clusternode name="GenSAN1" nodeid="1">
>>      <fence>
>>        <method name="pcmk-redirect">
>>          <device name="pcmk" port="GenSAN1"/>
>>        </method>
>>      </fence>
>>    </clusternode>
>>    <clusternode name="GenSAN2" nodeid="2">
>>      <fence>
>>        <method name="pcmk-redirect">
>>          <device name="pcmk" port="GenSAN2"/>
>>        </method>
>>      </fence>
>>    </clusternode>
>>  </clusternodes>
>>  <fencedevices>
>>    <fencedevice name="pcmk" agent="fence_pcmk"/>
>>  </fencedevices>
>> </cluster>
>>
>>
>>
>> Is there reason why the script would behave like this when called from
>> cman scripts?
>
>I dont know what the scripts do.
>
>> Seems like the script isn't processing input properly.
>
>Correct.
>
>Try the following patch:
>
>diff --git a/fencing/fence_pcmk b/fencing/fence_pcmk
>index e071da5..3b7a887 100755
>--- a/fencing/fence_pcmk
>+++ b/fencing/fence_pcmk
>@@ -132,9 +132,10 @@ if (@ARGV > 0) {
>    version if defined $opt_V;
>
>    fail_usage "Unknown parameter." if (@ARGV > 0);
>-}
>
>-get_options_stdin();
>+} else {
>+    get_options_stdin();
>+}
>
> $opt_o=lc($opt_o);
> fail "failed: unrecognised action: $opt_o"
>
>
>>
>> Thanks for your help,
>>
>> Brendan
>>
>> On 11/20/11 5:27 PM, "Andrew Beekhof" <andrew at beekhof.net> wrote:
>>
>>>When invoked by cman, stdin is used to pass in the options.
>>>So this problem only occurs when you run it from the command line -
>>>which shouldn't be necessary.
>>>
>>>I've not yet found better loop logic but you can work around the
>>>problem by running with < /dev/null
>>>
>>>On Mon, Nov 21, 2011 at 9:15 AM, Brendan Regan <bregan at paragusit.com>
>>>wrote:
>>>> Hi,
>>>> I am having a problem with the fence_pcmk agent.  It seem to be
>>>>getting
>>>> stuck in an infinite loop in this while loop:
>>>>
>>>>    while( defined($in = <>) )
>>>>     {
>>>>         $_ = $in;
>>>>         chomp;
>>>>      # strip leading and trailing whitespace
>>>>         s/^\s*//;
>>>>         s/\s*$//;
>>>>      # skip comments
>>>>         next if /^#/;
>>>>         $line+=1;
>>>>         $opt=$_;
>>>>         next unless $opt;
>>>> I verified this using perl ­d and stepping through the code.
>>>> If I understand this correctly the script should leave the loop when
>>>>the
>>>> value of $in becomes undefined or if $opt is true.
>>>> I have been trying to figure out if I am missing some Perl module.  I
>>>> included a list below of the load modules when running the script with
>>>>perl
>>>> ­d
>>>> When I run the script with perl ­w I get the following:
>>>>
>>>> /usr/bin/perl -w /usr/sbin/fence_pcmk -o status
>>>> print (...) interpreted as function at /usr/sbin/fence_pcmk line 174.
>>>> Name "main::extra_args" used only once: possible typo at
>>>> /usr/sbin/fence_pcmk line 21.
>>>> Name "main::pid" used only once: possible typo at /usr/sbin/fence_pcmk
>>>>line
>>>> 150.
>>>>
>>>> I am running:
>>>> pacemaker 1.1.6
>>>> corosync 1.3.3
>>>> cman 3.1.5
>>>> Perl 5.12.4
>>>> Loading DB routines from perl5db.pl version 1.33
>>>> Editor support available.
>>>> Enter h or `h h' for help, or `man perldebug' for more help.
>>>> main::(/usr/sbin/fence_pcmk:5): my $ME = $0;
>>>>   DB<1> M
>>>> 'Carp.pm' => '1.17 from /usr/lib64/perl5/5.12.4/Carp.pm'
>>>> 'Exporter.pm' => '5.64_01 from /usr/lib64/perl5/5.12.4/Exporter.pm'
>>>> 'Exporter/Heavy.pm' => '5.64_01 from
>>>> /usr/lib64/perl5/5.12.4/Exporter/Heavy.pm'
>>>> 'Getopt/Long.pm' => '2.38 from
>>>> /usr/lib64/perl5/vendor_perl/5.12.4/Getopt/Long.pm'
>>>> 'IO.pm' => '1.25 from
>>>> /usr/lib64/perl5/vendor_perl/5.12.4/x86_64-linux/IO.pm'
>>>> 'IO/Handle.pm' => '1.28 from
>>>> /usr/lib64/perl5/vendor_perl/5.12.4/x86_64-linux/IO/Handle.pm'
>>>> 'SelectSaver.pm' => '1.02 from /usr/lib64/perl5/5.12.4/SelectSaver.pm'
>>>> 'Symbol.pm' => '1.07 from /usr/lib64/perl5/5.12.4/Symbol.pm'
>>>> 'Term/Cap.pm' => '1.12 from /usr/lib64/perl5/5.12.4/Term/Cap.pm'
>>>> 'Term/ReadLine.pm' => '1.05 from
>>>>/usr/lib64/perl5/5.12.4/Term/ReadLine.pm'
>>>> 'XSLoader.pm' => '0.10 from /usr/lib64/perl5/5.12.4/XSLoader.pm'
>>>> 'constant.pm' => '1.20 from /usr/lib64/perl5/5.12.4/constant.pm'
>>>> 'overload.pm' => '1.10 from /usr/lib64/perl5/5.12.4/overload.pm'
>>>> 'perl5db.pl' => '1.33 from /usr/lib64/perl5/5.12.4/perl5db.pl'
>>>> 'strict.pm' => '1.04 from /usr/lib64/perl5/5.12.4/strict.pm'
>>>> 'vars.pm' => '1.01 from /usr/lib64/perl5/5.12.4/vars.pm'
>>>> 'warnings.pm' => '1.09 from /usr/lib64/perl5/5.12.4/warnings.pm'
>>>> 'warnings/register.pm' => '1.01 from
>>>> /usr/lib64/perl5/5.12.4/warnings/register.pm'
>>>>   DB<1>
>>>>
>>>> Thanks for you assistance.
>>>> Brendan Regan
>>>>
>>>> _______________________________________________
>>>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>>
>>>> Project Home: http://www.clusterlabs.org
>>>> Getting started:
>>>>http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>> Bugs:
>>>>
>>>>http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemak
>>>>er
>>>>
>>>>
>>>
>>>_______________________________________________
>>>Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>>>http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>>
>>>Project Home: http://www.clusterlabs.org
>>>Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>>>Bugs:
>>>http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemake
>>>r
>>
>>
>> _______________________________________________
>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>> Project Home: http://www.clusterlabs.org
>> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>> Bugs: 
>>http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
>>
>
>_______________________________________________
>Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
>http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
>Project Home: http://www.clusterlabs.org
>Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>Bugs: 
>http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker



More information about the Pacemaker mailing list