[Pacemaker] [corosync] Trouble with active/active

Andrew Beekhof andrew at beekhof.net
Wed Nov 2 14:22:32 UTC 2011


Please avoid starting a new thread every 5s.  Its way too much noise.
Pick one software stack and concentrate on getting that working rather
than attempting them all at once.

On Tue, Nov 1, 2011 at 8:15 AM, Nick Khamis <symack at gmail.com> wrote:
> Hello Everyone,
>
> I have the following built from source:
>
> Corosync 1.4.2
> Pacemaker 1.1.6
> Cman 3.1.7
>
> Corosync, with service.d/pcmk works fine pcmk crm is started etc.. I
> have an existing
> cib configuration as shown bellow, and the RAs load fine.
>
>
> <corosync.conf>
>
> totem {
>
>        version: 2
>
>        # How long before declaring a token lost (ms)
>        token:          5000
>
>        # How many token retransmits before forming a new configuration
>        token_retransmits_before_loss_const: 20
>
>        # How long to wait for join messages in the membership protocol (ms)
>        join:           1000
>
>        # How long to wait for consensus to be achieved before starting a
> new round of membership configuration (ms)
>        consensus:      7500
>
>        # Turn off the virtual synchrony filter
>        vsftype:        none
>
>        # Number of messages that may be sent by one processor on receipt of the token
>        max_messages:   20
>
>        # Disable encryption
>        secauth:        off
>
>        # How many threads to use for encryption/decryption
>        threads:        0
>
>        # Limit generated nodeids to 31-bits (positive signed integers)
>        clear_node_high_bit: yes
>
>        # Optionally assign a fixed node id (integer)
>        nodeid:         4
>
>        interface {
>                ringnumber: 0
>
>                # The following three values need to be set based on your environment
>                bindnetaddr: 192.168.2.0
>                mcastaddr: 226.94.1.1
>                mcastport: 5405
>        }
>  }
>
> amf {
>        mode: disabled
> }
>
>
> <cib conf>
>
> node astdrbd1 \
>       attributes standby="off"
> node astdrbd2 \
>       attributes standby="off"
> primitive astIP ocf:heartbeat:IPaddr2 \
>        op monitor interval="60" timeout="20" \
>        params ip="192.168.2.6" cidr_netmask="24" \
>        nic="eth2" broadcast="192.168.2.255" \
>        lvs_support="true"
> primitive astDRBD ocf:linbit:drbd \
>        params drbd_resource="r0.res" \
>        op monitor role=Master interval="20" timeout="20"\
>        op monitor role=Slave interval="30" timeout="20"
> ms msAstDRBD astDRBD \
>        meta master-max="2" clone-max=2 interleave="true" \
>        notify="true" globally-unique="false"
> primitive astDLM ocf:pacemaker:controld \
>        op monitor interval="120s"
> primitive astO2CB ocf:pacemaker:o2cb op monitor interval="120s"
> primitive astFilesystem ocf:heartbeat:Filesystem \
>        params device="/dev/drbd0" directory="/service" fstype="ocfs2" \
>        op monitor interval="120" \
>        meta target-role="Started"
> order astDrbdAfterIP \
>        inf: astIP msAstDRBD
> order dlmAfterDRBD \
>        inf: msAstDRBD:promote astDLM:start
> order o2cbAfterDLM \
>        inf:  astDLM:promote astO2CB:start
> order astFilesystemAfterO2cb \
>        inf: astO2CB:promote astFilesystem:start
> colocation astDrbdOnIP \
>        inf: msAstDRBD:Master astIP
> colocation dlmOnDRBD \
>        inf: astDLM msAstDRBD:Master
> colocation o2cbOnDLM \
>        inf: astO2CB astDLM:Master
> colocation astFilesystemOnO2CB \
>        inf: astFilesystem astO2CB:Master
> location prefer-ast1 astIP inf: astdrbd1
> location prefer-ast2 astIP inf: astdrbd2
> property $id="cib-bootstrap-options" \
>        no-quorum-policy="ignore" \
>        stonith-enabled="false" \
>        expected-quorum-votes="5" \
>        dc-version="1.1.6-9971ebba4494012a93c03b40a2c58ec0eb60f50c" \
>        cluster-recheck-interval="0" \
>        cluster-infrastructure="openais"
>        rsc_defaults $id="rsc-options" \
>        resource-stickiness="100"
>
>
> Add cman for active/active support into the formula, and I am not sure
> how the whole thing
> should start spinning
>
>
> <cluster.conf>
>
> <?xml version="1.0"?>
> <cluster name="ASTCluster" config_version="3">
> <logging debug="off"/>
> <cman expected_votes="1" two_node="1"/>
> <clusternodes>
> <clusternode name="astdrbd1" nodeid="1">
> <fence>
> <method name="pcmk-redirect">
> <device name="pcmk" port="astdrbd1"/>
> </method>
> </fence>
> </clusternode>
> <clusternode name="astdrbd2" nodeid="2">
> <fence>
> <method name="pcmk-redirect">
> <device name="pcmk" port="astdrbd2"/>
> </method>
> </fence>
> </clusternode>
> </clusternodes>
> <fencedevices>
> <fencedevice agent="fence_pcmk" name="pcmk"/>
> </fencedevices>
> </cluster>
>
> /etc/cororosync/service.d/pcmk renamed pcmk.bak
>
> Starting cman works fine
>
> When trying to start pacemaker I get the following:
>
> /etc/init.d/pacemaker start
>
> Oct 27 15:41:54 astdrbd1 pacemakerd: [18628]: info:
> crm_log_init_worker: Changed active directory to
> /usr/var/lib/heartbeat/cores/root
> Oct 27 15:42:07 astdrbd1 pacemakerd: [18630]: info: Invoked: pacemakerd -$
> Oct 27 15:42:07 astdrbd1 pacemakerd: [18630]: info:
> crm_log_init_worker: Changed active directory to
> /usr/var/lib/heartbeat/cores/root
> Oct 27 16:17:01 astdrbd1 /USR/SBIN/CRON[30164]: (root) CMD (   cd / &&
> run-parts --report /etc/cron.hourly)
> Oct 27 17:01:16 astdrbd1 udevd-work[4484]: kernel-provided name
> 'ocfs2_control' and NAME= 'misc/ocfs2_control' disagree, please use
> SYMLINK+= or change the kernel to provide the proper name
> Oct 27 17:01:16 astdrbd1 kernel: [26174.953112] ocfs2: Registered
> cluster interface user
> Oct 27 17:01:16 astdrbd1 kernel: [26175.082045] OCFS2 Node Manager 1.5.0
> Oct 27 17:01:16 astdrbd1 kernel: [26175.252185] OCFS2 1.5.0
> Oct 27 17:01:17 astdrbd1 ocfs2_controld: [4497]: info:
> get_cluster_type: Assuming a 'heartbeat' based cluster
> Oct 27 17:01:17 astdrbd1 ocfs2_controld: [4497]: CRIT:
> get_cluster_type: This installation of Pacemaker does not support the
> 'heartbeat' cluster infrastructure.  Terminating.
>
> I never installed heartbeat? I was never quite sure why
> /var/lib/heartbeat existed in the first place?
>
> pacemakerd -v
>
> pacemakerd[2038]: 2011/10/31_16:43:47 info: config_find_next:
> Processing additional service options...
> pacemakerd[2038]: 2011/10/31_16:43:47 info: get_config_opt: Found
> 'pacemaker' for option: name
> pacemakerd[2038]: 2011/10/31_16:43:47 info: get_config_opt: Found '0'
> for option: ver
> pacemakerd[2038]: 2011/10/31_16:43:47 info: get_cluster_type: Detected
> an active 'classic openais (with plugin)' cluster
> pacemakerd[2038]: 2011/10/31_16:43:47 info: read_config: Reading
> configure for stack: classic openais (with plugin)
> pacemakerd[2038]: 2011/10/31_16:43:47 info: config_find_next:
> Processing additional service options...
> pacemakerd[2038]: 2011/10/31_16:43:47 info: get_config_opt: Found
> 'pacemaker' for option: name
> pacemakerd[2038]: 2011/10/31_16:43:47 info: get_config_opt: Found '0'
> for option: ver
> pacemakerd[2038]: 2011/10/31_16:43:47 ERROR: read_config: We can only
> start Pacemaker from init if using version 1 of the Pacemaker plugin
> for Corosync.
>
> Can someone please help me understand what is goiing on here. Because
> at this point there are:
>
> Two Cluster Managers (Pacemaker, CMAN)
> Two Messaging Layers (Corosync, OpenAIS), and for some
> reason some Heartbeat material?
> I am not sure but I think I have 2 RA as well (Cluster Labs RA, CMAN RA)?
>
> Please Help,
>
> Nick.
> _______________________________________________
> discuss mailing list
> discuss at corosync.org
> http://lists.corosync.org/mailman/listinfo/discuss
>




More information about the Pacemaker mailing list