[Pacemaker] [PATCH]Bug 2567 - crm resource migrate should support an optional "role" parameter

Holger Teutsch holger.teutsch at web.de
Mon May 9 07:58:50 UTC 2011


On Fri, 2011-05-06 at 16:15 +0200, Andrew Beekhof wrote:
> On Fri, May 6, 2011 at 12:28 PM, Holger Teutsch <holger.teutsch at web.de> wrote:
> > On Fri, 2011-05-06 at 11:03 +0200, Andrew Beekhof wrote:
> >> On Fri, May 6, 2011 at 9:53 AM, Andrew Beekhof <andrew at beekhof.net> wrote:
> >> > On Thu, May 5, 2011 at 5:43 PM, Holger Teutsch <holger.teutsch at web.de> wrote:
> >> >> On Fri, 2011-04-29 at 09:41 +0200, Andrew Beekhof wrote:
> >> >>> >>
> >> >>> > Unfortunately the devel code does not run at all in my environment so I
> >> >>> > have to fix this first.
> >> >>>
> >> >>> Oh?  I ran CTS on it the other day and it was fine here.
> >> >>>
> >> >>
> >> >> I installed pacemaker-devel on top of a compilation of pacemaker-1.1. In
> >> >> addition I tried "make uninstall" for both versions and then again
> >> >> "make install" for devel. Pacemaker does not come up, crm_mon shows
> >> >> nodes as offline.
> >> >>
> >> >> I suspect reason is
> >> >> May  5 17:09:34 devel1 crmd: [5942]: notice: crmd_peer_update: Status update: Client devel1/crmd now has status [online] (DC=<null>)
> >> >> May  5 17:09:34 devel1 crmd: [5942]: info: crm_update_peer: Node devel1: id=1790093504 state=unknown addr=(null) votes=0 born=0 seen=0 proc=00000000000000000000000000111312 (new)
> >> >> May  5 17:09:34 devel1 crmd: [5942]: info: pcmk_quorum_notification: Membership 0: quorum retained (0)
> >> >> May  5 17:09:34 devel1 crmd: [5942]: debug: do_fsa_action: actions:trace: #011// A_STARTED
> >> >> May  5 17:09:34 devel1 crmd: [5942]: info: do_started: Delaying start, no membership data (0000000000100000)
> >> >>                                                       ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
> >> >> May  5 17:09:34 devel1 crmd: [5942]: debug: register_fsa_input_adv: Stalling the FSA pending further input: cause=C_FSA_INTERNAL
> >> >>
> >> >> Any ideas ?
> >> >
> >> > Hg version?  Corosync config?
> >> > I'm running -devel here right now and things are fine.
> >>
> >> Uh, I think I see now.
> >> Try http://hg.clusterlabs.org/pacemaker/1.1/rev/b94ce5673ce4
> >>
> 
> Yeah, I realized afterwards that it was specific to devel.
> What does your corosync config look like?
I run corosync-1.3.0-3.1.x86_64.
It's exactly the same config that worked with
pacemaker 1.1 rev 10608:b4f456380f60



-------------- next part --------------
# Please read the corosync.conf.5 manual page
compatibility: whitetank

aisexec {
	# Run as root - this is necessary to be able to manage
	# resources with Pacemaker
	user:		root
	group:		root
}

service {
	# Load the Pacemaker Cluster Resource Manager
	ver:		1
	name:		pacemaker
	use_mgmtd:	yes
	use_logd:	yes
}

totem {
	# The only valid version is 2
	version:	2

	# How long before declaring a token lost (ms)
	token:		5000

	# How many token retransmits before forming a new configuration
	token_retransmits_before_loss_const: 10

	# How long to wait for join messages in the membership protocol (ms)
	join:		60

	# How long to wait for consensus to be achieved before starting
	# a new round of membership configuration (ms)
	consensus:	6000

	# Turn off the virtual synchrony filter
	vsftype:	none

	# Number of messages that may be sent by one processor on
	# receipt of the token
	max_messages:	20

	# Limit generated nodeids to 31-bits (positive signed integers)
	clear_node_high_bit: yes

	# Disable encryption
	secauth:	off

	# How many threads to use for encryption/decryption
	threads:	0

	# Optionally assign a fixed node id (integer)
	# nodeid:	1234

	rrp_mode:	active

	interface {
		ringnumber:	0

		# The following values need to be set based on your environment
		bindnetaddr:	192.168.178.0
		mcastaddr:	226.94.40.1
		mcastport:	5409
	}

	interface {
		ringnumber:	1

		# The following values need to be set based on your environment
		bindnetaddr:	10.1.1.0
		mcastaddr:	226.94.41.1
		mcastport:	5411
	}
}

logging {
	fileline:	off
	to_stderr:	no
	to_logfile:	no
	to_syslog:	yes
	syslog_facility: daemon
	debug:		on
	timestamp:	off
}

amf {
	mode: disabled
}



More information about the Pacemaker mailing list