[Pacemaker] Cluster type is: corosync

Proskurin Kirill k.proskurin at corp.mail.ru
Wed Jul 27 06:58:50 UTC 2011


27.07.2011 6:41, Andrew Beekhof пишет:

>>> Ok. And did you add the pacemaker configuration options to corosync's
>>> config file?
>>
>>
>> I attach our corosync.conf. It is same on all nodes except IP addr.
>
> You missed a step from:
>     http://www.clusterlabs.org/doc/en-US/Pacemaker/1.1/html/Clusters_from_Scratch/s-configure-corosync.html

Witch one?
At previous conversation Steven Dake said what I can use exact ip addr 
if I wish(And I do - because some node may have more then one ip addr on 
the same network).
And I run pacemakerd after corosync start.

I can`t say for sure but seems to I fix it by turning "compatibility: 
none". After this it start to tell me what here are "Cluster type: openais".

>> Pacemaker is black now - no configuration at all.
>>
>> Online nodes:
>> [root at mysender1 ~]# crm configure show
>> node mysender1.example.com
>> node mysender2.example.com
>> node mysender3.example.com
>> node mysender4.example.com
>> node mysender5.example.com
>> node mysender6.example.com
>> node mysender7.example.com
>> property $id="cib-bootstrap-options" \
>>         dc-version="1.1.5-3-01e86afaaa6d4a8c4836f68df80ababd6ca3902f" \
>>         cluster-infrastructure="openais" \
>>         expected-quorum-votes="6"
>>
>>
>> Offline nodes(Cluster type is: corosync)
>> [root at mysender2 ~]# crm configure show
>> [root at mysender2 ~]#
>>
>>
>>>
>>>> pacemaker-1.1.5
>>>> corosync-1.4.0
>>>> cluster-glue-1.0.6
>>>> openais-1.1.2
>>>>
>>>> All nodes have same rpms.
>>>>
>>>>> On Fri, Jul 22, 2011 at 7:47 PM, Proskurin Kirill
>>>>> <k.proskurin at corp.example.com>      wrote:
>>>>>>
>>>>>> Hello again!
>>>>>>
>>>>>> Hope I`m not flooding too much here but I have another problem.
>>>>>>
>>>>>> I install same rpm of corosync, openais, pacemaker, cluster_glue on all
>>>>>> nodes. I check it twice.
>>>>>>
>>>>>> And then I start some of they - they can`t connect to cluster and stays
>>>>>> offline. In logs I see what they see other nodes and connectivity is
>>>>>> ok.
>>>>>> But
>>>>>> I found the difference:
>>>>>>
>>>>>> Online nodes in cluster have:
>>>>>> [root at mysender39 ~]# grep 'Cluster type is' /var/log/corosync.log
>>>>>> Jul 22 20:38:58 mysender39.example.com stonith-ng: [3499]: info:
>>>>>> get_cluster_type: Cluster type is: 'openais'.
>>>>>> Jul 22 20:38:58 mysender39.example.com attrd: [3502]: info:
>>>>>> get_cluster_type:
>>>>>> Cluster type is: 'openais'.
>>>>>> Jul 22 20:38:58 mysender39.example.com cib: [3500]: info:
>>>>>> get_cluster_type:
>>>>>> Cluster type is: 'openais'.
>>>>>> Jul 22 20:38:59 mysender39.example.com crmd: [3504]: info:
>>>>>> get_cluster_type:
>>>>>> Cluster type is: 'openais'.
>>>>>>
>>>>>> Offline have:
>>>>>> [root at mysender2 ~]# grep 'Cluster type is' /var/log/corosync.log
>>>>>> Jul 22 13:39:17 mysender2.example.com stonith-ng: [9028]: info:
>>>>>> get_cluster_type: Cluster type is: 'corosync'.
>>>>>> Jul 22 13:39:17 mysender2.example.com attrd: [9031]: info:
>>>>>> get_cluster_type:
>>>>>> Cluster type is: 'corosync'.
>>>>>> Jul 22 13:39:17 mysender2.example.com cib: [9029]: info:
>>>>>> get_cluster_type:
>>>>>> Cluster type is: 'corosync'.
>>>>>> Jul 22 13:39:18 mysender2.example.com crmd: [9033]: info:
>>>>>> get_cluster_type:
>>>>>> Cluster type is: 'corosync'.
>>>>>>
>>>>>> What`s wrong and how can I fix it?


-- 
Best regards,
Proskurin Kirill




More information about the Pacemaker mailing list