[Pacemaker] Problem with rrp_mode

Andrew Beekhof andrew at beekhof.net
Wed Jan 19 14:56:34 UTC 2011


I dont think rrp is well tested by upstream.
You might want to ask on the corosync ML to be sure.

On Wed, Jan 19, 2011 at 3:43 PM, Michael Schwartzkopff
<misch at clusterbau.com> wrote:
> Hi,
>
> I have two network cards and configured corosync-1.2.7 with
> rrp_mode: active
>
> at first corosync-cfg -s tells me
> Printing ring status.
> Local node ID 1210452490
> RING ID 0
>        id      = 10.10.38.72
>        status  = ring 0 active with no faults
> RING ID 1
>        id      = 10.10.40.115
>        status  = ring 1 active with no faults
>
> after a very short time I see the following:
>
> RING ID 1
>        id      = 10.10.40.115
>        status  = Incrementing problem counter for seqid 1352 iface
> 10.10.40.115 to [3 of 10]
>
> and finally:
> RING ID 1
>        id      = 10.10.40.115
>        status  = Marking seqid 1390 ringid 1 interface 10.10.40.115 FAULTY -
> adminisrtative intervention required.
>
> Anybody being successful at all using rrp_mode with corosync?
>
> Greetings.
>
> --
> Dr. Michael Schwartzkopff
> Guardinistr. 63
> 81375 München
>
> Tel: (0163) 172 50 98
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
>
>




More information about the Pacemaker mailing list