[Pacemaker] pingd process dies for no reason

Patrik.Rapposch at knapp.com Patrik.Rapposch at knapp.com
Tue Jan 11 10:24:35 UTC 2011


we already made changes to the interval and timeout (<op 
id="pingd-op-monitor-30s" interval="30s" name="monitor" timeout="10s"/>).

how big should dampen be set?

please correct me, if i am wrong, as i calculate it as following:
assuming the last check was ok and in the next second, the failures takes 
place:
then we there would be 29s till the next check will start, and another 10 
seconds timeout, plus 5 seconds dampen. this would be 44 seconds, isn't 
that enough?

thx,

kr patrik




Mit freundlichen Grüßen / Best Regards

Patrik Rapposch, BSc
System Administration

KNAPP Systemintegration GmbH
Waltenbachstraße 9
8700 Leoben, Austria 
Phone: +43 3842 805-915
Fax: +43 3842 82930-500
patrik.rapposch at knapp.com 
www.KNAPP.com 

Commercial register number: FN 138870x
Commercial register court: Leoben

The information in this e-mail (including any attachment) is confidential 
and intended to be for the use of the addressee(s) only. If you have 
received the e-mail by mistake, any disclosure, copy, distribution or use 
of the contents of the e-mail is prohibited, and you must delete the 
e-mail from your system. As e-mail can be changed electronically KNAPP 
assumes no responsibility for any alteration to this e-mail or its 
attachments. KNAPP has taken every reasonable precaution to ensure that 
any attachment to this e-mail has been swept for virus. However, KNAPP 
does not accept any liability for damage sustained as a result of such 
attachment being virus infected and strongly recommend that you carry out 
your own virus check before opening any attachment.



Dejan Muhamedagic <dejanmm at fastmail.fm> 
10.01.2011 17:48
Bitte antworten an
The Pacemaker cluster resource manager  <pacemaker at oss.clusterlabs.org>


An
The Pacemaker cluster resource manager <pacemaker at oss.clusterlabs.org>
Kopie

Thema
Re: [Pacemaker] Antwort: Re:  pingd process dies for no reason






Hi again,

On Fri, Jan 07, 2011 at 04:35:40PM +0100, Patrik.Rapposch at knapp.com wrote:
[...]
> > the ressource is configured in following way:
> > <clone id="pingdclone">
> >         <meta_attributes id="pingdclone-meta_attributes">
> >           <nvpair id="pingdclone-meta_attributes-globally-unique"
> > name="globally-unique" value="false"/>
> >         </meta_attributes>
> >         <primitive class="ocf" id="pingd" provider="pacemaker"
> > type="ping">
> >           <instance_attributes id="pingd-instance_attributes">
> >             <nvpair id="pingd-instance_attributes-host_list"
> > name="host_list" value="xxx.xxx.xxx.xxx"/>
> >             <nvpair id="pingd-instance_attributes-multiplier"
> > name="multiplier" value="100"/>
> >             <nvpair id="nvpair-96877c9e-2825-4d7d-997b-944652f89584"
> > name="dampen" value="5s"/>
> >           </instance_attributes>
> >           <operations>
> >             <op id="pingd-monitor-15s" interval="15s" name="monitor"
> > timeout="5s"/>

5s is way too short.

Thanks,

Dejan

> >           </operations>
> >         </primitive>
> >       </clone>
> > 
> > thx for your help in advance.
> > 
> > Mit freundlichen Grüßen / Best Regards
> > 
> > Patrik Rapposch, BSc
> 
> Please use the "ping" resource agent instead of the "pingd"
> 
> Greetings,
> 
> -- 
> Dr. Michael Schwartzkopff
> Guardinistr. 63
> 81375 München
> 
> Tel: (0163) 172 50 98
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> 
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: 
> 
http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
> 


> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> 
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: 
http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker


_______________________________________________
Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
http://oss.clusterlabs.org/mailman/listinfo/pacemaker

Project Home: http://www.clusterlabs.org
Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
Bugs: 
http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20110111/c3274de9/attachment-0001.htm>


More information about the Pacemaker mailing list