[Pacemaker] How to set up logging for CTSlab

Andrew Beekhof andrew at beekhof.net
Mon Jan 10 22:28:31 UTC 2011


On Mon, Jan 10, 2011 at 5:40 PM, Dejan Muhamedagic <dejanmm at fastmail.fm> wrote:
> Hi,
>
> On Mon, Jan 10, 2011 at 10:46:58AM +0100, Simon Jansen wrote:
>> Hi,
>>
>> I would like to test my cluster with the cluster test suite. I followed the
>> instructions of the README file to set up the logging with syslog-ng.
>> Further I changed the syslog_facility in the corosync.conf file to local7.
>> The cluster nodes are sending their logs to the exerciser and the exerciser
>> writes the log entries into the file /var/log/ha-log-local7. The entries
>> have the form
>> Jan 10 10:27:11 192.168.200.10 corosync[903]:   [SERV  ] Unloading all
>> Corosync service engines.
>> Jan 10 10:27:11 192.168.200.10 corosync[903]:   [pcmk  ] notice:
>> pcmk_shutdown: Shuting down Pacemaker
>> Jan 10 10:27:11 192.168.200.10 corosync[903]:   [pcmk  ] notice:
>> pcmk_shutdown: mgmtd confirmed stopped
>> Jan 10 10:27:11 192.168.200.10 corosync[903]:   [pcmk  ] notice: stop_child:
>> Sent -15 to crmd: [1023]
>> So I would say that the remote logging is working.
>> But when I start the CTS by executing the following command on the exerciser
>>
>>   python CTSlab.py --nodes "192.168.200.10 192.168.200.20" --at-boot 1
>> --stack corosync --stonith no --logfile /var/log/ha-log-local7 1
>> the LogAudit fails.
>>
>> The output of CTS is
>> Jan 10 10:04:03 Random seed is: 1294650243
>> Jan 10 10:04:03 >>>>>>>>>>>>>>>> BEGINNING 1 TESTS
>> Jan 10 10:04:03 Stack:            corosync (flatiron)
>> Jan 10 10:04:03 Schema:           pacemaker-1.0
>> Jan 10 10:04:03 Scenario:         Random Test Execution
>> Jan 10 10:04:03 Random Seed:      1294650243
>> Jan 10 10:04:03 System log files: /var/log/ha-log-local7
>> Jan 10 10:04:03 Cluster nodes:
>> Jan 10 10:04:03 * 192.168.200.10
>> Jan 10 10:04:03 * 192.168.200.20
>> Jan 10 10:06:17 Testing for syslog logs
>> Jan 10 10:06:17 Testing for remote logs
>> Jan 10 10:07:26 Restarting logging on: ['192.168.200.10', '192.168.200.20']
>> Jan 10 10:09:01 Restarting logging on: ['192.168.200.10', '192.168.200.20']
>> Jan 10 10:11:37 Restarting logging on: ['192.168.200.10', '192.168.200.20']
>> Jan 10 10:15:02 Restarting logging on: ['192.168.200.10', '192.168.200.20']
>> Jan 10 10:19:02 ERROR: Cluster logging unrecoverable.
>> Jan 10 10:19:02 Audit LogAudit FAILED.
>
> What happened to the node names? I mean, your nodes are being
> named after their IP addresses. That's unusual.
>
> Otherwise, it should work. BTW, what do you see when you run
> "logger -p local7.info hi" on one of the nodes? Does that end in
> the syslog on your central host?

thats not a requirement anymore




More information about the Pacemaker mailing list