[Pacemaker] [Problem] The attrd does not sometimes stop.

Lars Ellenberg lars.ellenberg at linbit.com
Thu Dec 29 19:47:25 UTC 2011


On Thu, Dec 22, 2011 at 09:54:47AM +0900, renayama19661014 at ybb.ne.jp wrote:
> Hi Dejan,
> Hi Lars,
> 
> In our environment, the problem recurred with the patch of Mr. Lars.
> After a problem occurred, I sent TERM signal, but attrd does not seem to
> receive TERM at all.

If you are able to reproduce,
you could try to find out what exactly attrd is doing.

various ways to try to do that:
cat /proc/<pid-of-attrd>/stack   # if your platform supports that
strace it,
ltrace it,
attach with gdb and provide a stack trace, or even start to single step it,
cause attrd to core dump, and analyse the core.

> The reconsideration of the patch is necessary for the solution to problem.
> 
> 
> Best Regards,
> Hideo Yamauchi.
> 
> 
> --- On Tue, 2011/11/15, renayama19661014 at ybb.ne.jp <renayama19661014 at ybb.ne.jp> wrote:
> 
> > Hi Dejan,
> > Hi Lars,
> > 
> > I understood it.
> > I try the operation of the patch in our environment.
> > 
> > To Alan: Will you try a patch?
> > 
> > Best Regards,
> > Hideo Yamauchi.
> > 
> > --- On Tue, 2011/11/15, Dejan Muhamedagic <dejanmm at fastmail.fm> wrote:
> > 
> > > Hi,
> > > 
> > > On Mon, Nov 14, 2011 at 01:17:37PM +0100, Lars Ellenberg wrote:
> > > > On Mon, Nov 14, 2011 at 11:58:09AM +1100, Andrew Beekhof wrote:
> > > > > On Mon, Nov 7, 2011 at 8:39 AM, Lars Ellenberg
> > > > > <lars.ellenberg at linbit.com> wrote:
> > > > > > On Thu, Nov 03, 2011 at 01:49:46AM +1100, Andrew Beekhof wrote:
> > > > > >> On Tue, Oct 18, 2011 at 12:19 PM,  <renayama19661014 at ybb.ne.jp> wrote:
> > > > > >> > Hi,
> > > > > >> >
> > > > > >> > We sometimes fail in a stop of attrd.
> > > > > >> >
> > > > > >> > Step1. start a cluster in 2 nodes
> > > > > >> > Step2. stop the first node.(/etc/init.d/heartbeat stop.)
> > > > > >> > Step3. stop the second node after time passed a little.(/etc/init.d/heartbeat
> > > > > >> > stop.)
> > > > > >> >
> > > > > >> > The attrd catches the TERM signal, but does not stop.
> > > > > >>
> > > > > >> There's no evidence that it actually catches it, only that it is sent.
> > > > > >> I've seen it before but never figured out why it occurs.
> > > > > >
> > > > > > I had it once tracked down almost to where it occurs, but then got distracted.
> > > > > > Yes the signal was delivered.
> > > > > >
> > > > > > I *think* it had to do with attrd doing a blocking read,
> > > > > > or looping in some internal message delivery function too often.
> > > > > >
> > > > > > I had a quick look at the code again now, to try and remember,
> > > > > > but I'm not sure.
> > > > > >
> > > > > > I *may* be that, because
> > > > > > xmlfromIPC(IPC_Channel * ch, int timeout) calls
> > > > > >    msg = msgfromIPC_timeout(ch, MSG_ALLOWINTR, timeout, &ipc_rc);
> > > > > >
> > > > > > And MSG_ALLOWINTR will cause msgfromIPC_ll() to
> > > > > >        IPC_INTR:
> > > > > >                if ( allow_intr){
> > > > > >                        goto startwait;
> > > > > >
> > > > > > Depending on the frequency of deliverd signals, it may cause this goto
> > > > > > startwait loop to never exit, because the timeout always starts again
> > > > > > from the full passed in timeout.
> > > > > >
> > > > > > If only one signal is deliverd, it may still take 120 seconds
> > > > > > (MAX_IPC_DELAY from crm.h) to be actually processed, as the signal
> > > > > > handler only raises a flag for the next mainloop iteration.
> > > > > >
> > > > > > If a (non-fatal) signal is delivered every few seconds,
> > > > > > then the goto loop will never timeout.
> > > > > >
> > > > > > Please someone check this for plausibility ;-)
> > > > > 
> > > > > Most plausible explanation I've heard so far... still odd that only
> > > > > attrd is affected.
> > > > > So what do we do about it?
> > > > 
> > > > Reproduce, and confirm that this is what people are seeing.
> > > > 
> > > > Make attrd non-blocking?
> > > > 
> > > > Fix the ipc layer to not restart the full timeout,
> > > > but only the remaining partial time?
> > > 
> > > Lars and I made a quick patch for cluster-glue (attached).
> > > Hideo-san, is there a way for you to verify if it helps? The
> > > patch is not perfect and under unfavourable circumstances it may
> > > still take a long time for the caller to exit, but it'd be good
> > > to know if this is the right spot.
> > > 
> > > Cheers,
> > > 
> > > Dejan
> > > 
> > > > -- 
> > > > : Lars Ellenberg
> > > > : LINBIT | Your Way to High Availability
> > > > : DRBD/HA support and consulting http://www.linbit.com
> > > > 
> > > > _______________________________________________
> > > > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > > > 
> > > > Project Home: http://www.clusterlabs.org
> > > > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > > > Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
> > >
> > 
> 
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> 
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org

-- 
: Lars Ellenberg
: LINBIT | Your Way to High Availability
: DRBD/HA support and consulting http://www.linbit.com

DRBD® and LINBIT® are registered trademarks of LINBIT, Austria.




More information about the Pacemaker mailing list