[Pacemaker] Impossible to add a 4th node to a cluster

Guillaume Chanaud guillaume.chanaud at connecting-nature.com
Thu Oct 28 14:09:36 UTC 2010


  Hello,

i have a cluster of two master/slave drbd server running into a vlan 
(machines are dedicated servers)
(filer1 and filer2)
I added a third node to the cluster (a "blank node" for the moment) 
correctly
(server1)
When i add a 4th node to the cluster (which is a "mirror" of server1)
(server2)
this node start as standalone...Here is the message.log :

Oct 28 15:59:27 ns209045 corosync[16543]:   [TOTEM ] A processor joined 
or left the membership and a new membership was formed.
Oct 28 15:59:28 ns209045 corosync[16543]:   [pcmk  ] notice: 
pcmk_peer_update: Transitional membership event on ring 945392: memb=1, 
new=0, lost=0
Oct 28 15:59:28 ns209045 corosync[16543]:   [pcmk  ] info: 
pcmk_peer_update: memb: server2 16820416
Oct 28 15:59:28 ns209045 corosync[16543]:   [pcmk  ] notice: 
pcmk_peer_update: Stable membership event on ring 945392: memb=1, new=0, 
lost=0
Oct 28 15:59:28 ns209045 corosync[16543]:   [pcmk  ] info: 
pcmk_peer_update: MEMB: server2 16820416
Oct 28 15:59:28 ns209045 corosync[16543]:   [TOTEM ] A processor joined 
or left the membership and a new membership was formed.
Oct 28 15:59:29 ns209045 corosync[16543]:   [pcmk  ] notice: 
pcmk_peer_update: Transitional membership event on ring 945416: memb=1, 
new=0, lost=0
Oct 28 15:59:29 ns209045 corosync[16543]:   [pcmk  ] info: 
pcmk_peer_update: memb: server2 16820416
Oct 28 15:59:29 ns209045 corosync[16543]:   [pcmk  ] notice: 
pcmk_peer_update: Stable membership event on ring 945416: memb=1, new=0, 
lost=0
Oct 28 15:59:29 ns209045 corosync[16543]:   [pcmk  ] info: 
pcmk_peer_update: MEMB: server2 16820416

[...] Message repeat many many times

Now i stop the server1, and i start the server2...server2 start 
correctly and is added to the cluster...but when
i want to start server1, same thing happens...(so things are inverted 
but result is the same...when i start one the serverX, the other can't 
start...)

My corosync.conf is configured in broadcast, not multicast....I have 
lots of problem with multicast because lots of briged VM on the vlan
doesn't see the multicast packets, or doesn't join the multicast group 
correctly...

Any hint on this ??

Guillaume




More information about the Pacemaker mailing list