[Pacemaker] Antwort: Re: sles11, ocfs2, 2 node cluster with one storage, failover problem

Patrik.Rapposch at knapp.com Patrik.Rapposch at knapp.com
Tue May 25 14:27:08 UTC 2010





hy,

thx guys, for the help, to my regret the ocfs2 project  was put on ice and
I am right now working on the clvm solution, so it will be no more possible
to test something with ocfs2 in the near future.

but I hope that it will better work with sp1, which released these days.

Mit freundlichen Grüßen / Best Regards

Patrik Rapposch, Bsc.
Systemadministration

KNAPP Systemintegration GmbH
Waltenbachstraße 9
8700 Leoben, Austria
Phone: +43 3842 805
Mobil:
Fax: +43 3842 82930-990
patrik.rapposch at knapp.com
www.KNAPP.com

Commercial register number: FN 138870x
Commercial register court: Leoben


                                                                           
             Jayakrishnan                                                  
             <jayakrishnanlll@                                             
             gmail.com>                                                 An 
                                         The Pacemaker cluster resource    
             24.05.2010 18:24            manager                           
                                         <pacemaker at oss.clusterlabs.org>   
                                                                     Kopie 
              Bitte antworten                                              
                    an                                               Thema 
               The Pacemaker             Re: [Pacemaker] sles11, ocfs2, 2  
             cluster resource            node cluster with one storage,    
                  manager                failover problem                  
             <pacemaker at oss.cl                                             
              usterlabs.org>                                               
                                                                           
                                                                           
                                                                           
                                                                           






On Mon, May 17, 2010 at 9:03 PM, Dejan Muhamedagic <dejanmm at fastmail.fm>
wrote:
      Hi,

      On Mon, May 17, 2010 at 12:24:12PM +0200, Patrik.Rapposch at knapp.com
      wrote:
      >
      > hy,
      >
      > I have following problem:
      >
      > I configured a 2 node cluster running SLES11 with the HAE
      extension. I use
      > "pacemaker-1.0.3-4.1", "openais-0.80.3-26.1" and "ocfs2 1.4.1".
      > I used the SLES high availabilty guide to configure my cluster.
      >
      > I have 2 ocfs2 mount clone-resources running on the cluster.
      >
      > My first problem was, that the cluster didn't work in any way,
      because I
      > defined 2 rings in the openais.conf, which only will be supported
      from
      > novell with the SLES SP1, so I switched back to one ring.
      >
      > The major problem I have now is following:
      >
      > When I reboot one node, or stop openais on one node, the cluster
      behaves as
      > it should, that means the surviving node
      > is still able to access the ocfs2 mounts and works normaly.
      >
      > But if I trigger an ifdown command on the interface, which is
      defined in

      openais/pacemaker can't handle ifdown. Neither can corosync with
      multiple rings. You have to make sure that the interface stays up
      at all times (i.e. don't use dhcp).

      Thanks,

      Dejan


Hello Dejan,

What about using the ping RA here?


--
Regards,

Jayakrishnan. L

Visit:
www.foralllinux.blogspot.com
www.jayakrishnan.bravehost.com


      > the openais.conf, the node hangs and restarts after a while. The
      surviving
      > node doesn't support to open any other ssh sessions and if I try to
      open a
      > mounted directory, the existing session hangs and I have to wait,
      till the
      > first node is up again.
      >
      > I don't have a glue how this can happen and hope, that you can help
      me.
      >
      > Attached you can find my configs and failure logs.
      >
      > (See attached file: config_plus_failure_logs.rtf)
      >
      > Mit freundlichen Grüßen / Best Regards
      >
      > Patrik Rapposch, Bsc.
      > Systemadministration
      >
      > KNAPP Systemintegration GmbH
      > Waltenbachstraße 9
      > 8700 Leoben, Austria
      > Phone: +43 3842 805
      > Mobil:
      > Fax: +43 3842 82930-990
      > patrik.rapposch at knapp.com
      > www.KNAPP.com
      >
      > Commercial register number: FN 138870x
      > Commercial register court: Leoben


      > _______________________________________________
      > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
      > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
      >
      > Project Home: http://www.clusterlabs.org
      > Getting started:
      http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf


      _______________________________________________
      Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
      http://oss.clusterlabs.org/mailman/listinfo/pacemaker

      Project Home: http://www.clusterlabs.org
      Getting started:
      http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf



_______________________________________________
Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
http://oss.clusterlabs.org/mailman/listinfo/pacemaker

Project Home: http://www.clusterlabs.org
Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf





More information about the Pacemaker mailing list