[Pacemaker] 2 node cluster with clvm, configuration help needed...

Patrik.Rapposch at knapp.com Patrik.Rapposch at knapp.com
Wed Jun 2 11:25:41 UTC 2010






hy,

thx for your reply.

I installed python-curses and xml, but didn't help.
Yeah first we used the hae extension, but as you told us, that the versions
we use, are really old and this could be the problem, we tried to upgrade
to newer versions to get it running.

Is there maybe another way to get it running with newer versions? or could
you may please have a look on my config, which I had in the old running
versions? I reattach it right now.

thx.

kr, patrik

(See attached file: cib_aktuell.xml)

Mit freundlichen Grüßen / Best Regards

Patrik Rapposch
System Administration

KNAPP Systemintegration GmbH
Waltenbachstraße 9
8700 Leoben, Austria
Phone: +43 3842 805-915
Fax: +43 3842 82930-500
peter.wratitsch at knapp.com
www.KNAPP.com

Commercial register number: FN 138870x
Commercial register court: Leoben

The information in this e-mail (including any attachment) is confidential
and intended to be for the use of the addressee(s) only. If you have
received the e-mail by mistake, any disclosure, copy, distribution or use
of the contents of the e-mail is prohibited, and you must delete the e-mail
from your system. As e-mail can be changed electronically KNAPP assumes no
responsibility for any alteration to this e-mail or its attachments. KNAPP
has taken every reasonable precaution to ensure that any attachment to this
e-mail has been swept for virus. However, KNAPP does not accept any
liability for damage sustained as a result of such attachment being virus
infected and strongly recommend that you carry out your own virus check
before opening any attachment.


                                                                           
             Andrew Beekhof                                                
             <andrew at beekhof.n                                             
             et>                                                        An 
                                         The Pacemaker cluster resource    
             02.06.2010 12:53            manager                           
                                         <pacemaker at oss.clusterlabs.org>   
                                                                     Kopie 
              Bitte antworten                                              
                    an                                               Thema 
               The Pacemaker             Re: [Pacemaker] Antwort: Re:      
             cluster resource            Antwort: Re: 2 node cluster with  
                  manager                clvm,     configuration help      
             <pacemaker at oss.cl           needed...                         
              usterlabs.org>                                               
                                                                           
                                                                           
                                                                           
                                                                           
                                                                           




On Wed, Jun 2, 2010 at 7:50 AM,  <Patrik.Rapposch at knapp.com> wrote:
>
>
>
>
> hy,
>
> so I tried yesterday to update to a newer version. I am using sles11. At
> least it worked with the opensuse 11.0 repo
> (http://www.clusterlabs.org/rpm/opensuse-11.0/x86_64/) and one additional
> library, which I got as rpm.
>
> The problem I have now is, that if I want to run the crm command, I get
> following error:
>
> "abort: couldn't find crm libraries in [/usr/sbin /usr/lib/python26.zip
> /usr/lib64/python2.6 /usr/lib64/python2.6/plat-linux2
> /usr/lib64/python2.6/lib-tk /usr/lib64/python2.6/lib-old
> /usr/lib64/python2.6/lib-dynload /usr/lib64/python2.6/site-packages
> /usr/lib64/python2.6/site-packages/Numeric
> /usr/local/lib64/python2.6/site-packages
> /usr/lib64/python2.6/site-packages/gtk-2.0]
> (check your install and PYTHONPATH)"
>
> I don't know what libraries it is exactly searching for,

you might be missing python-curses and python-xml

> I tried
> rearranging my PYTHONPATH to some directories, but had no access. The
next
> thing I saw was, that it now works with corosync (had to configure it)
> instead of openais and that the gui totally disappeared, so I have no
> commands like "crm_gui" or "hb_gui".

Since you're on SLES, have you thought about using the HAE extension?
It has all the above plus the gui.

>
> Do you maybe know how to fix this, or do you know a successfull way to
> implement a newer version into sles11. Service pack for sles11 should be
> available today, but they didn't make it available right now, so I dunno
if
> there is also a hae sp1, which has newer versions in it.
>
> Thx for your help.
>
> Mit freundlichen Grüßen / Best Regards
>
> Patrik Rapposch, Bsc.
> Systemadministration
>
> KNAPP Systemintegration GmbH
> Waltenbachstraße 9
> 8700 Leoben, Austria
> Phone: +43 3842 805
> Mobil:
> Fax: +43 3842 82930-990
> patrik.rapposch at knapp.com
> www.KNAPP.com
>
> Commercial register number: FN 138870x
> Commercial register court: Leoben
>
>
>
>             Andrew Beekhof
>             <andrew at beekhof.n
>             et>                                                        An
>                                         The Pacemaker cluster resource
>             31.05.2010 08:46            manager
>                                         <pacemaker at oss.clusterlabs.org>
>                                                                     Kopie
>              Bitte antworten
>                    an                                               Thema
>               The Pacemaker             Re: [Pacemaker] Antwort: Re: 2
>             cluster resource            node cluster with clvm,
>                  manager                configuration   help needed...
>             <pacemaker at oss.cl
>              usterlabs.org>
>
>
>
>
>
>
>
>
> On Mon, May 31, 2010 at 8:37 AM,  <Patrik.Rapposch at knapp.com> wrote:
>>
>>
>>
>>
>> hy,
>>
>> thx for your reply.
>> k, i'll try that in the next few hours.
>>
>> is there any other possibility, why there is such a strange behaviour in
>> the cluster?
>>
>> I short redesribe the main problem:
>>
>> failover between the nodes works fine, the ressources get started on the
>> remaining node (let it be node2). When node1 comes back online,
>> the resources on node2 get stopped and started again on node2. ---> very
>> strange. I already tried a lot, but didn't find a solution.
>>
>> so the failback has a bug.
>
> Or did have a year ago when 1.0.3 was out... you might have more luck
> with something a little more recent.
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>
>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs:
http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
>

_______________________________________________
Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
http://oss.clusterlabs.org/mailman/listinfo/pacemaker

Project Home: http://www.clusterlabs.org
Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
Bugs:
http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
-------------- next part --------------
A non-text attachment was scrubbed...
Name: cib_aktuell.xml
Type: application/octet-stream
Size: 48599 bytes
Desc: not available
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20100602/823faf94/attachment-0004.obj>


More information about the Pacemaker mailing list