[Pacemaker] primitive dlm ocf:pacemaker:controld --> WARNING: dlm: default-action-timeout 20s for start is smaller than the advised 90

Andrew Beekhof andrew at beekhof.net
Mon Apr 19 07:52:31 UTC 2010


On Mon, Apr 12, 2010 at 2:26 PM, Roberto Giordani <r.giordani at libero.it> wrote:
> Hi Andrew,
> these are the rpms installed on Opensuse 11.2 x86_64 to obtain a cluster
> with OCFS2 and DLM support on Xen kernel
>
> pacemaker-pygui-1.4-15.1.x86_64
> pacemaker-1.0.8-4.x86_64
> libpacemaker3-1.0.8-4.x86_64
>
> libdlm-2.99.08-10.4.x86_64
> libdlm2-2.99.08-10.4.x86_64
>
> corosync-1.2.1-1.x86_64
> libcorosync-1.2.1-1.x86_64
>
> heartbeat-3.0.2-2.x86_64
> heartbeat-common-2.99.3-14.3.x86_64
> heartbeat-resources-2.99.3-14.3.x86_64
>
> libglue2-1.0.3-1.x86_64
> libgssglue1-0.1-8.2.x86_64
> cluster-glue-1.0.3-1.x86_64
>
> resource-agents-0.9-2.1.x86_64
>
> ocfs2-tools-o2cb-1.4.1-25.6.x86_64
> ocfs2console-1.4.1-25.6.x86_64
> ocfs2-tools-1.4.1-25.6.x86_64
>
> libopenais2-0.80.3-26.2.x86_64
>
> Attached there are:
> -) corosync.conf
> -) corosync log
> -) /var/log/messages
>
> -) xml configuration
>
> I've observed that opensuse 11.2 doesn't have heartbeat-common,
> heartbeat-resources,

heartbeat-common has been replaced by libglue2 and heartbeat-resources
by resource-agents.
you definitely shouldn't have both sets of packages installed.

> libdlm, libdlm2 updated to 3.0.2-2,

where did you get these from?

> and if I try to install libopenais2-1.1.0-1.x86_64.rpm from clusterlabs, I
> should remove ocfs2-tools, libdlm and pacemaker-pygui.

right because they were built for (and therefor require) an older
version than the ones on clusterlabs.org
no wonder the dlm and ocfs2 aren't starting.

either:
a) only use what comes in 11.2
b) install everything from clusterlabs.org and rebuild the gui, dlm
and ocfs2-tools packages

> So this semas the only way to have ocfs2 and dlm support on Opensuse 11.2
> Any idea to run a pacemaker cluster with this scenario?
> Thank you for your investigation :-)
>
> On 04/12/2010 09:10 AM, Andrew Beekhof wrote:
>
> Hi,
>
> Please provide (as compressed attachments): logs and the pacemaker
> configuration
> This is the minimum we require in order to comment intelligently on
> your question.
>
> -- Andrew
>
>
> On Sun, Apr 11, 2010 at 6:32 PM, Roberto Giordani <r.giordani at libero.it>
> wrote:
>
>
> Hello,
> I've started a new cluster with 4 nodes that should work with ocfs2
> When I try to configure the dlm primitive I've received the following
> warning and the the dlm-clone doesn't  start.
>
> crm(live)# cib new stack-glue
> INFO: stack-glue shadow CIB created
> crm(stack-glue)# configure primitive dlm ocf:pacemaker:controld op monitor
> interval=120s
> WARNING: dlm: default-action-timeout 20s for start is smaller than the
> advised 90
> WARNING: dlm: default-action-timeout 20s for stop is smaller than the
> advised 100
> WARNING: dlm: default-action-timeout 20s for start is smaller than the
> advised 90
> WARNING: dlm: default-action-timeout 20s for stop is smaller than the
> advised 100
> crm(stack-glue)# configure clone dlm-clone dlm meta interleave=true
> WARNING: dlm: default-action-timeout 20s for start is smaller than the
> advised 90
> WARNING: dlm: default-action-timeout 20s for stop is smaller than the
> advised 100
> crm(stack-glue)# cib commit stack-glue
> INFO: commited 'stack-glue' shadow CIB to the cluster
> crm(stack-glue)# quit
> bye
>
> This is the crm_mon status
> ============
> Last updated: Sun Apr 11 18:30:42 2010
> Stack: openais
> Current DC: node4 - partition with quorum
> Version: 1.0.8-9881a7350d6182bae9e8e557cf20a3cc5dac3ee7
> 4 Nodes configured, 4 expected votes
> 1 Resources configured.
> ============
>
> Online: [ node1 node2 node3 node4 ]
>
>
> Failed actions:
>    dlm:0_start_0 (node=node2, call=5, rc=7, status=complete): not running
>    dlm:2_start_0 (node=node3, call=3, rc=7, status=complete): not running
>    dlm:0_start_0 (node=node1, call=3, rc=7, status=complete): not running
>    dlm:3_start_0 (node=node4, call=3, rc=7, status=complete): not running
>
>
> Any idea?
>
> Regards,
> Roberto.
>
> _______________________________________________
> Pacemaker mailing list
> Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
>
>
> _______________________________________________
> Pacemaker mailing list
> Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
>




More information about the Pacemaker mailing list