[Pacemaker] primitive dlm ocf:pacemaker:controld --> WARNING: dlm: default-action-timeout 20s for start is smaller than the advised 90

Roberto Giordani r.giordani at libero.it
Tue Apr 13 04:15:34 EDT 2010


Hi Andrew,
did you understand the problem?

Regards,
Roberto.

Hi Andrew,
these are the rpms installed on Opensuse 11.2 x86_64 to obtain a cluster 
with OCFS2 and DLM support on Xen kernel

pacemaker-pygui-1.4-15.1.x86_64
pacemaker-1.0.8-4.x86_64
libpacemaker3-1.0.8-4.x86_64

libdlm-2.99.08-10.4.x86_64
libdlm2-2.99.08-10.4.x86_64

corosync-1.2.1-1.x86_64
libcorosync-1.2.1-1.x86_64

heartbeat-3.0.2-2.x86_64
heartbeat-common-2.99.3-14.3.x86_64
heartbeat-resources-2.99.3-14.3.x86_64

libglue2-1.0.3-1.x86_64
libgssglue1-0.1-8.2.x86_64
cluster-glue-1.0.3-1.x86_64

resource-agents-0.9-2.1.x86_64

ocfs2-tools-o2cb-1.4.1-25.6.x86_64
ocfs2console-1.4.1-25.6.x86_64
ocfs2-tools-1.4.1-25.6.x86_64

libopenais2-0.80.3-26.2.x86_64

Attached there are:
-) corosync.conf
-) corosync log
-) /var/log/messages

-) xml configuration

I've observed that opensuse 11.2 doesn't have heartbeat-common, 
heartbeat-resources, libdlm, libdlm2 updated to 3.0.2-2,
and if I try to install libopenais2-1.1.0-1.x86_64.rpm 
<http://www.clusterlabs.org/rpm/opensuse-11.2/x86_64/libopenais2-1.1.0-1.x86_64.rpm> 
from clusterlabs, I should remove ocfs2-tools, libdlm and pacemaker-pygui.

So this semas the only way to have ocfs2 and dlm support on Opensuse 11.2
Any idea to run a pacemaker cluster with this scenario?
Thank you for your investigation :-)

On 04/12/2010 09:10 AM, Andrew Beekhof wrote:
> Hi,
>
> Please provide (as compressed attachments): logs and the pacemaker configuration
> This is the minimum we require in order to comment intelligently on
> your question.
>
> -- Andrew
>
>
> On Sun, Apr 11, 2010 at 6:32 PM, Roberto Giordani<r.giordani at libero.it>  wrote:
>    
>> Hello,
>> I've started a new cluster with 4 nodes that should work with ocfs2
>> When I try to configure the dlm primitive I've received the following
>> warning and the the dlm-clone doesn't  start.
>>
>> crm(live)# cib new stack-glue
>> INFO: stack-glue shadow CIB created
>> crm(stack-glue)# configure primitive dlm ocf:pacemaker:controld op monitor
>> interval=120s
>> WARNING: dlm: default-action-timeout 20s for start is smaller than the
>> advised 90
>> WARNING: dlm: default-action-timeout 20s for stop is smaller than the
>> advised 100
>> WARNING: dlm: default-action-timeout 20s for start is smaller than the
>> advised 90
>> WARNING: dlm: default-action-timeout 20s for stop is smaller than the
>> advised 100
>> crm(stack-glue)# configure clone dlm-clone dlm meta interleave=true
>> WARNING: dlm: default-action-timeout 20s for start is smaller than the
>> advised 90
>> WARNING: dlm: default-action-timeout 20s for stop is smaller than the
>> advised 100
>> crm(stack-glue)# cib commit stack-glue
>> INFO: commited 'stack-glue' shadow CIB to the cluster
>> crm(stack-glue)# quit
>> bye
>>
>> This is the crm_mon status
>> ============
>> Last updated: Sun Apr 11 18:30:42 2010
>> Stack: openais
>> Current DC: node4 - partition with quorum
>> Version: 1.0.8-9881a7350d6182bae9e8e557cf20a3cc5dac3ee7
>> 4 Nodes configured, 4 expected votes
>> 1 Resources configured.
>> ============
>>
>> Online: [ node1 node2 node3 node4 ]
>>
>>
>> Failed actions:
>>     dlm:0_start_0 (node=node2, call=5, rc=7, status=complete): not running
>>     dlm:2_start_0 (node=node3, call=3, rc=7, status=complete): not running
>>     dlm:0_start_0 (node=node1, call=3, rc=7, status=complete): not running
>>     dlm:3_start_0 (node=node4, call=3, rc=7, status=complete): not running
>>
>>
>> Any idea?
>>
>> Regards,
>> Roberto.
>>
>> _______________________________________________
>> Pacemaker mailing list
>> Pacemaker at oss.clusterlabs.org
>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>>
>>      
> _______________________________________________
> Pacemaker mailing list
> Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>    

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20100413/98e84325/attachment-0001.html>


More information about the Pacemaker mailing list