[Pacemaker] CLUSTERIP/iptables interaction

Michael Schwartzkopff misch at multinet.de
Tue Dec 15 08:45:39 UTC 2009


Am Dienstag, 15. Dezember 2009 09:37:01 schrieb Chris Picton:
> On Tue, 15 Dec 2009 07:13:29 +0000, Chris Picton wrote:
> >>> > The monitor op shouldn't make any changes.  If the rule has gone
> >>> > away, the monitor op should return failure to indicate the resource
> >>> > is broken, which will result in Pacemaker telling the the failed
> >>> > resource to stop, and start again.  Actually, from the logs it looks
> >>> > like a restart was attempted, and the stop op reported success, but
> >>> > the subsequent start failed for some reason.
> >>> >
> >>> > Regards,
> >>> >
> >>> > Tim
> >>>
> >>> Exactly. So the RA seems to have a problem handeling this error
> >>> scenario correctly.
> >>
> >> OK. Anybody knows how should it work and where's the problem. It seems
> >> like it can't find some proc file.
> >
> > I will have a go at fixing the RA today to do the following: 1. Detect
> > the error in monitor and return the correct value 2. Stop the resource
> > cleanly
> > 3. Start it up again.
> >
> >
> > Will let you know how it goes.
>
> The below patch seems to detect this specific failure, and stop the
> resource cleanly.
>
> The start operation is able to start it up again without errors
>
> Chris
>
> -------------------
> --- IPaddr2.orig	2009-12-15 10:07:58.000000000 +0200
> +++ IPaddr2.new	2009-12-15 10:22:03.000000000 +0200
> @@ -548,6 +548,7 @@
>  # returns:
>  # ok = served (for CIP: + hash bucket)
>  # partial = served and no hash bucket (CIP only)
> +# partial2 = served and no CIP iptables rule
>  # no = nothing
>  #
>  ip_served() {
> @@ -577,6 +578,10 @@
>  	fi
>
>  	# Special handling for the CIP:
> +	if [ ! -e $IP_CIP_FILE ]; then
> +		echo "partial2"
> +		return 0
> +	fi
>  	if egrep -q "(^|,)${IP_INC_NO}(,|$)" $IP_CIP_FILE ; then
>  		echo "ok"
>  		return 0
> @@ -620,7 +625,7 @@
>  		exit $OCF_SUCCESS
>  	fi
>
> -	if [ -n "$IP_CIP" ] && [ $ip_status = "no" ]; then
> +	if [ -n "$IP_CIP" ] && [ $ip_status = "no" ] || [ $ip_status =
> "partial2" ]; then
>  		$MODPROBE ip_conntrack
>  		$IPTABLES -I INPUT -d $BASEIP -i $NIC -j CLUSTERIP \
>  				--new \
> @@ -691,13 +696,14 @@
>  		fi
>  	fi
>  	local ip_status=`ip_served`
> +	ocf_log info "IP status = $ip_status, IP_CIP=$IP_CIP"
>
>  	if [ $ip_status = "no" ]; then
>
>  		: Requested interface not in use
>
>  		exit $OCF_SUCCESS
>  	fi
>
> -	if [ -n "$IP_CIP" ]; then
> +	if [ -n "$IP_CIP" ] && [ $ip_status != "partial2" ]; then
>  		if [ $ip_status = "partial" ]; then
>  			exit $OCF_SUCCESS
>  		fi
> @@ -743,7 +749,7 @@
>  	ok)
>  		return $OCF_SUCCESS
>  		;;
> -	partial|no)
> +	partial|no|partial2)
>  		exit $OCF_NOT_RUNNING
>  		;;
>  	*)

Thank you very much for you help!


-- 
Dr. Michael Schwartzkopff
MultiNET Services GmbH
Addresse: Bretonischer Ring 7; 85630 Grasbrunn; Germany
Tel: +49 - 89 - 45 69 11 0
Fax: +49 - 89 - 45 69 11 21
mob: +49 - 174 - 343 28 75

mail: misch at multinet.de
web: www.multinet.de

Sitz der Gesellschaft: 85630 Grasbrunn
Registergericht: Amtsgericht München HRB 114375
Geschäftsführer: Günter Jurgeneit, Hubert Martens

---

PGP Fingerprint: F919 3919 FF12 ED5A 2801 DEA6 AA77 57A4 EDD8 979B
Skype: misch42




More information about the Pacemaker mailing list