[Pacemaker] Monitoring on master node not running after standby is connected

[Juraj Fabo]

On Mon, Nov 11, 2013 at 1:52 AM, Andrew Beekhof <andrew at beekhof.net> wrote:

>
> On 16 Oct 2013, at 12:21 am, Juraj Fabo <juraj.fabo at gmail.com> wrote:
>
> > Juraj Fabo <juraj.fabo at ...> writes:
> >>
> >> Hello Andrew
> >>
> >>
> >> thank you for the response.
> >>
> >> I've patched crmd, cleaned the cluster, done the scenario steps and
> > created crm_report which is attached.
> >>
> >> After loading the cluster configuration both nodes were running the
> IFDS-
> > Stateful resource monitoring properly, however after restarting
> pacemaker on
> > the slave node monitoring on the master node was cancelled
> >>
> >>
> >> ifds1 was slave, monitoring of IFDS-Stateful running 11seconds interval
> >> ifds2 was master,  monitoring of IFDS-Stateful running 10 seconds
> > intervallog messages in ifds_ha.log
> >>
> >>
> >> with best regards
> >>
> >>
> >>
> >> Juraj
> >>
> >
> > Hello
> >
> > I've downgraded pacemaker in my cluster to version 1.1.8 just to see
> whether
> > the monitoring of master slave resource will be running on both nodes in
> > parallel.
> > It is actually running, after entering HotStandby node the monitoring on
> > hotstandby is monitoring postgresql resource in defined interval and on
> > master in interval defined for role master.
> > This time I used my target config with postgresql and other resource, I
> do
> > not have logs for test cluster with dummy "Stateful" resource.
> >
> > Now I'm confused due to fact, that using 1.1.8 pacemaker (in which this
> bug
> > was fixed) is ok, while 1.1.10 not - at least in my config and according
> to
> > my understanding. I did not see other reports with similar symptoms, but
> > OTOH with 1.1.8 monitoring is running on both nodes.
> >
> > Should I provide some more logs/symptoms from 1.1.10 case to be able to
> > proceed?
>
> I am almost certain you're being affected by:
>
>    https://github.com/beekhof/pacemaker/commit/58962338
>
> Apply that patch and you should be fine.
>
> Apologies for not making the connection sooner :-(
>
>
Hi Andrew

thank you for the answer and help.
Patch fixed my problem.

Juraj
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.clusterlabs.org/pipermail/pacemaker/attachments/20140114/6d453370/attachment-0002.html>