[Pacemaker] how to enable verbose logging for failed

Tue May 15 19:59:47 EDT 2012

On Tue, May 15, 2012 at 9:27 PM, Igor Zinovik <zinovik.igor at gmail.com> wrote:
> 2012/5/14 Andrew Beekhof <andrew at beekhof.net>:
>> On Sat, May 12, 2012 at 11:41 PM, Igor Zinovik <zinovik.igor at gmail.com> wrote:
>>>  Hello.
>>>
>>> How can i increase verbosity level for resource that fails to start:
>>> # egrep -ei '(warn|error)' /var/log/pacemaker.log
>>> May 12 17:25:12 ldap2 lrmd: [6279]: WARN: Core dumps could be lost if
>>> multiple dumps occur.
>>> May 12 17:25:12 ldap2 lrmd: [6279]: WARN: Consider setting non-default
>>> value in /proc/sys/kernel/core_pattern (or equivalent) for maximum
>>> supportability
>>> May 12 17:25:12 ldap2 lrmd: [6279]: WARN: Consider setting
>>> /proc/sys/kernel/core_uses_pid (or equivalent) to 1 for maximum
>>> supportability
>>> May 12 17:25:13 ldap2 corosync[6270]:  [pcmk  ] ERROR:
>>> pcmk_wait_dispatch: Child process mgmtd exited (pid=6283, rc=100)
>>> May 12 17:28:02 ldap2 crmd: [6282]: info: process_lrm_event: LRM
>>> operation slapd_mirrormode_monitor_10000 (call=5, rc=1, cib-update=14,
>>> confirmed=false) unknown error
>>> May 12 17:28:04 ldap2 crmd: [6282]: info: process_lrm_event: LRM
>>> operation slapd_mirrormode_monitor_10000 (call=8, rc=1, cib-update=17,
>>> confirmed=false) unknown error
>>> May 12 17:28:05 ldap2 crmd: [6282]: info: process_lrm_event: LRM
>>> operation slapd_mirrormode_monitor_10000 (call=11, rc=1,
>>> cib-update=20, confirmed=false) unknown error
>>>
>>> In slapd log i do not see any messages which shows the culprit of failure.
>>
>> Is it producing any? Did you grep for "slapd" too?
>
> Unfortunately nothing.

The only additional thing Pacemaker can log is output from the RA.
Does it produce any?
Is slapd even being called? If so, you'll have to look at the slapd
config to see how to increase it's verbosity.

>
> My config file is correct:
> ldap2:~# /usr/lib/openldap/slapd -Tt
> config file testing succeeded
>
> I can successfully start slapd by hands:
> ldap2:~ # service ldap start
> redirecting to systemctl
> ldap2:~ # service ldap status
> redirecting to systemctl
> ldap.service - LSB: OpenLDAP Server (slapd)
>          Loaded: loaded (/etc/init.d/ldap)
>          Active: active (running) since Tue, 15 May 2012 15:19:51 +0400; 3s ago
>         Process: 2278 ExecStop=/etc/init.d/ldap stop (code=exited,
> status=0/SUCCESS)
>         Process: 2762 ExecStart=/etc/init.d/ldap start (code=exited,
> status=0/SUCCESS)
>          CGroup: name=systemd:/system/ldap.service
>                  2852 /usr/lib/openldap/slapd -h ldap:/// ldaps:///
> ldapi:/// -f /etc/openldap/slapd.conf -u ldap -g lda...
>
> When i create resource and commit configuration, i see following in
> pacemaker log:
> ldap2:~# egrep -e 'May 15 15:14' /var/log/pacemaker.log
> May 15 15:14:47 ldap2 crmd: [13576]: info: update_dc: Unset DC ldap1
> May 15 15:14:47 ldap2 crmd: [13576]: info: do_state_transition: State
> transition S_NOT_DC -> S_PENDING [ input=I_PENDING
> cause=C_FSA_INTERNAL origin=do_election_count_vote ]
> May 15 15:14:47 ldap2 crmd: [13576]: info: update_dc: Set DC to ldap1 (3.0.5)
> May 15 15:14:47 ldap2 crmd: [13576]: info: do_state_transition: State
> transition S_PENDING -> S_NOT_DC [ input=I_NOT_DC cause=C_HA_MESSAGE
> origin=do_cl_join_finalize_respond ]
>
> ldap2:~# crm_mon -1 -o -r
> ============
> Last updated: Tue May 15 15:24:05 2012
> Last change: Tue May 15 15:14:47 2012 by root via cibadmin on ldap2
> Stack: openais
> Current DC: ldap1 - partition with quorum
> Version: 1.1.6-9971ebba4494012a93c03b40a2c58ec0eb60f50c
> 2 Nodes configured, 2 expected votes
> 2 Resources configured.
> ============
>
> Online: [ ldap2 ldap1 ]
>
> Full list of resources:
>
>  ldap_virtual_ip        (ocf::heartbeat:IPaddr2):       Started ldap1
>  slapd_mirrormode       (ocf::heartbeat:slapd): Stopped
>
> Operations:
> * Node ldap1:
>   ldap_virtual_ip: migration-threshold=1000000
>    + (33) start: rc=0 (ok)
>    + (34) monitor: interval=5000ms rc=0 (ok)
>   slapd_mirrormode:0: migration-threshold=1000000 fail-count=1000000
>    + (7) start: rc=1 (unknown error)
>   slapd_mirrormode: migration-threshold=3 fail-count=3
>    + (31) monitor: interval=10000ms rc=1 (unknown error)
>    + (32) stop: rc=0 (ok)
> * Node ldap2:
>   slapd_mirrormode: migration-threshold=3 fail-count=3
>    + (11) monitor: interval=10000ms rc=1 (unknown error)
>    + (12) stop: rc=0 (ok)
>
> Failed actions:
>    slapd_mirrormode:0_start_0 (node=ldap1, call=7, rc=1,
> status=complete): unknown error
>    slapd_mirrormode_monitor_10000 (node=ldap1, call=31, rc=1,
> status=complete): unknown error
>    slapd_mirrormode_monitor_10000 (node=ldap2, call=11, rc=1,
> status=complete): unknown error
>
> I tried following change to slapd agent:
> --- slapd.orig  2012-05-15 15:25:19.625554295 +0400
> +++ slapd       2012-05-15 15:25:27.330815814 +0400
> @@ -38,7 +38,7 @@
>  # Initialization:
>
>  : ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/resource.d/heartbeat}
> -. ${OCF_FUNCTIONS_DIR}/.ocf-shellfuncs
> +. ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs
>
>  : ${OCF_RESKEY_slapd="/usr/sbin/slapd"}
>  : ${OCF_RESKEY_ldapsearch="ldapsearch"}
>
> because in other agents that come with pacemaker there was no dot
> before `ocf-shellfuncs', e.g.:
> ldap2:~# grep ocf-shellfuncs
> /usr/lib/ocf/resource.d/heartbeat/{nginx,mysql,pgsql}
> /usr/lib/ocf/resource.d/heartbeat/nginx:. ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs
> /usr/lib/ocf/resource.d/heartbeat/mysql:. ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs
> /usr/lib/ocf/resource.d/heartbeat/pgsql:. ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org