[Pacemaker] Pacemaker will not mount ocfs2

[Johan Rosing Bergkvist]

Hi
Just an update.
So I upgraded to pacemaker 1.1.6 and tried to configure it all again,
without dlm.
It didn't work, I still got the " OCF_ERR_INSTALLED  so I started looking
through the setup and found that I didn't specify the drbd.conf path.
When  I added that meta and boom, it mounted like a dream.

Wasn't it supposed to return a OCF_ERR_CONFIGURED?

And is that meta even required?

I wonder if I messed something up(that is very likely) or maybe I missed
something.

I'll try to add the dlm today and see if it works.

Cheers.
Den 22. feb. 2012 12.34 skrev Florian Haas <florian at hastexo.com>:

> > ============
> > Last updated: Wed Feb 22 11:51:22 2012
> > Stack: openais
> > Current DC: cluster01 - partition with quorum
> > Version: 1.0.9-74392a28b7f31d7ddc86689598bd23114f58978b
>
> Please go to 1.1.5, at least, as soon as you can.
>
> > primitive Cluster-FS-DLM ocf:pacemaker:controld \
> >         op monitor interval="120s"
> >
> > primitive Cluster-FS-DRBD ocf:linbit:drbd \
> >         params drbd_resource="cluster-ocfs" \
> >         operations $id="Cluster-FS-DRBD-ops" \
> >         op monitor interval="20" role="Master" timout="20" \
> >         op monitor interval="30" role="Slave" timeout="20"
> >
> > primitive Cluster-FS-Mount ocf:heartbeat:Filesystem \
> >         params device="/dev/drbd/by-res/cluster-ocfs"
> > directory="/cluster" fstype="ocfs2" \
> >         op monitor interval="120"
> >
> > primitive Cluster-FS-O2CB ocf:pacemaker:o2cb \
> >         op monitor interval="120"
> >
> > primitive ClusterIP ocf:heartbeat:IPaddr2 \
> >         params ip="212.70.2.110" cidr_netmask="24" \
> >         op monitor interval="30s" \
> >         meta target-role="Started"
> >
> > ms Cluster-FS-DRBD-Master Cluster-FS-DRBD \
> >         meta resource-stickines="100" notify="true" interleave="true"
> > master-max="2"
> >
> > clone Cluster-FS-DLM-Clone Cluster-FS-DLM \
> >         meta globally-unique="false" interleave="true"
> >
> > clone Cluster-FS-Mount-Clone Cluster-FS-Mount \
> >         meta interleave="true" ordered="true"
> >
> > clone Cluster-FS-O2CB-Clone Cluster-FS-O2CB \
> >         meta globally-unique="false" interleave="true"
> >
> > colocation Cluster-FS-Colocation inf: Cluster-FS-DLM-Clone
> > Cluster-FS-DRBD-Master:Master
> >
> > colocation Cluster-FS-Mount-Colocation inf: Cluster-FS-Mount-Clone
> > Cluster-FS-O2CB-Clone
> >
> > colocation Cluster-FS-O2CB-Colocation inf: Cluster-FS-O2CB-Clone
> > Cluster-FS-DLM-Clone
> >
> > order Cluster-FS-DLM-Order 0: Cluster-FS-DRBD-Master:promote
> > Cluster-FS-DLM-Clone
> >
> > order Cluster-FS-Mount-Order 0: Cluster-FS-O2CB-Clone
> Cluster-FS-Mount-Clone
> >
> > order Cluster-FS-O2CB-Order 0: Cluster-FS-DLM-Clone Cluster-FS-O2CB-Clone
>
> Rather than having all those individual clones and constraints between
> them, you can greatly simplify your configuration with a cloned group:
>
> primitive p_dlm_controld ocf:pacemaker:controld \
>        op start interval="0" timeout="90" \
>        op stop interval="0" timeout="100" \
>        op monitor interval="10"
> primitive p_o2cb ocf:pacemaker:o2cb \
>        op start interval="0" timeout="90" \
>        op stop interval="0" timeout="100" \
>        op monitor interval="10"
> primitive p_fs_ocfs2 ocf:heartbeat:Filesystem \
>  params device="<your drbd device>" \
>    directory="<your mountpoint>" \
>    fstype="ocfs2"
> group g_ocfs2 p_dlm_controld p_o2cb p_fs_ocfs2
> clone cl_ocfs2 g_ocfs2 \
>        meta interleave="true"
>
> You'll still need that one order and colo constraint linking your cloned
> group to the DRBD master/slave set, of course.
>
> And if you're getting an OCF_ERR_INSTALLED error from
> ocf:pacemaker:o2cb, then there definitely will be an error message in
> the logs preceding that.
>
> grep -E 'o2cb.*ERROR' /var/log/{messages,syslog}
>
> Hope this helps.
>
> Cheers,
> Florian
>
> --
> Need help with High Availability?
> http://www.hastexo.com/now
>
> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://bugs.clusterlabs.org
>



-- 
MVH
Johan Bergkvist
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20120224/b43a7745/attachment-0003.html>