[Pacemaker] DRBD-MYSQL Pacemaker-Corosync won't failover when heartbeat cable pulled.

[Joe]

Hello everyone,

My goal is to build a HA DRBD and MYSQL on two nodes(active/passive).  I 
followed the " cluster from scratch" article to build this environment.  
If I do standby failover host, it works fine but when I pull the 
heartbeat cable from the active node, the resources do not fail over to 
the secondary. Please advise. Thank you very much. Joe

*CENTOS 5.6/drbd8.3/corosync/pacemaker

node-0 IP: 192.168.1.101 (heartbeat) 10.0.0.10 (drdb)
node-1 IP: 192.168.1.102 (heartbeat) 10.0.0.20 ( drbd)
Cluster Virtual IP: 192.168.1.160

* _crm configure show_
node $id="2b68511d-b96f-4b56-9f66-70262e3e2c46" mysqldrbd01 \
     attributes standby="off"
node $id="d86dc58b-2309-43d9-af96-6519127e83d7" mysqldrbd02 \
     attributes standby="off"
primitive res_Filesystem_QD_FS_DRBD ocf:heartbeat:Filesystem \
     params device="/dev/drbd0" directory="/replication/" fstype="ext3" \
     operations $id="res_Filesystem_QD_FS_DRBD-operations" \
     op start interval="0" timeout="60" \
     op stop interval="0" timeout="60" \
     op monitor interval="20" timeout="40" start-delay="0" \
     op notify interval="0" timeout="60" \
     meta target-role="started"
primitive res_IPaddr2_QD_IP_CLUSTER ocf:heartbeat:IPaddr2 \
     params ip="192.168.1.160" \
     operations $id="res_IPaddr2_QD_IP_CLUSTER-operations" \
     op start interval="0" timeout="20" \
     op stop interval="0" timeout="20" \
     op monitor interval="10" timeout="20" start-delay="0" \
     meta target-role="started"
primitive res_drbd_1 ocf:linbit:drbd \
     params drbd_resource="repdata" \
     operations $id="res_drbd_1-operations" \
     op start interval="0" timeout="240" \
     op promote interval="0" timeout="90" \
     op demote interval="0" timeout="90" \
     op stop interval="0" timeout="100" \
     op monitor interval="10" timeout="20" start-delay="1min" \
     op notify interval="0" timeout="90" \
     meta target-role="started"
primitive res_mysqld_QD_SQL_SERVICE lsb:mysqld \
     operations $id="res_mysqld_QD_SQL_SERVICE-operations" \
     op start interval="0" timeout="15" \
     op stop interval="0" timeout="15" \
     op monitor interval="15" timeout="15" start-delay="15" \
     meta target-role="started"
group QD_GROUP res_Filesystem_QD_FS_DRBD res_IPaddr2_QD_IP_CLUSTER 
res_mysqld_QD_SQL_SERVICE \
     meta target-role="started"
ms ms_drbd_1 res_drbd_1 \
     meta master-max="1" master-node-max="1" clone-max="2" 
clone-node-max="1" notify="true"
colocation QD_MYSQL_DRBD inf: QD_GROUP ms_drbd_1:Master
order QD_MYSQL_AFTER_DRBD inf: ms_drbd_1:promote QD_GROUP:start
property $id="cib-bootstrap-options" \
     dc-version="1.0.11-1554a83db0d3c3e546cfd3aaff6af1184f79ee87" \
     cluster-infrastructure="Heartbeat" \
     no-quorum-policy="ignore" \
     stonith-enabled="false" \
     last-lrm-refresh="980666220" \
     expected-quorum-votes="2"
rsc_defaults $id="rsc-options" \
     resource-stickiness="100"

*_/etc/corosync/corosync.conf_*
## generated by drbd-gui 0.9.9

aisexec {
         user: root
         group: root
}

corosync {
         user: root
         group: root
}

amf {
         mode: disabled
}

logging {
         to_stderr: yes
         debug: off
         timestamp: on
         to_file: no
         to_syslog: yes
         syslog_facility: daemon
}

totem {
         version: 2
         token: 3000
         token_retransmits_before_loss_const: 10
         join: 60
         consensus: 4000
         vsftype: none
         max_messages: 20
         clear_node_high_bit: yes
         secauth: on
         threads: 0
         # nodeid: 1234
         rrp_mode: active

#       interface {
#               ringnumber: 0
#               bindnetaddr: 10.0.0.0
#               mcastaddr: 226.94.1.1
#               mcastport: 5405
#       }

         interface {
                 ringnumber: 0
                 bindnetaddr: 192.168.1.0
                 mcastaddr: 226.94.1.1
                 mcastport: 5405
         }
}

service {
         ver: 0
         name: pacemaker
         use_mgmtd: no
}

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.clusterlabs.org/pipermail/pacemaker/attachments/20111028/caecc454/attachment-0002.html>