[Pacemaker] active cluster and load-balancer

[Arizka Ashar]

On Wed, Jun 29, 2011 at 1:16 PM, Raoul Bhatia [IPAX] <r.bhatia at ipax.at>wrote:

> On 29.06.2011 05:28, Arizka Ashar wrote:
>
>> Hello All,
>>
>> in active-active each node have clone vip..
>>
>> node1 = 1.2.3.4
>> node2 = 5.6.7.8
>> node3 = 9.10.11.12
>> clone vip = 13.14.15.16
>>
>
> honestly, that depends on your network setup and
> on the lvs forwarding type.
> (e.g. are the node's real ips routable?)
>
> what i would do:
> 1. configure the clone vip using a tun device on the real servers
>   (pay attention to the arp configuration!)
>   (13.14.15.16 = tunl0)
>
> 2. add the vip to the load balancers.
>   make this setup redundant using pacemaker.
>   (floating vip, ldirectord, etc.)
>   (lb ip = x.x.x.x, y.y.y.y; 13.14.15.16 = floating vip, not cloned)
>
> 3. point the lvs setup to the node's ips
>   (1.2.3.4, 5.6.7.8, 9.10.11.12)
>
> a similar setup is running at my company
> (except for the tunl devices which are not managed by pacemaker)
>
> cheers,
> raoul
>
> ______________________________**_________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/**mailman/listinfo/pacemaker<http://oss.clusterlabs.org/mailman/listinfo/pacemaker>
>
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/**doc/Cluster_from_Scratch.pdf<http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf>
> Bugs: http://developerbugs.linux-**foundation.org/enter_bug.cgi?**
> product=Pacemaker<http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker>
>

Hey Raoul

thank for suggestion, i will try that

first i just want to test on lvs side using nat and direct forwarding,
but without/reduced middle (real server),. LVS's -> active nodes

Warm regards,
arizka
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.clusterlabs.org/pipermail/pacemaker/attachments/20110629/4f4e7a26/attachment-0003.html>