[Pacemaker] strage monitor behaivour

Dejan Muhamedagic dejanmm at fastmail.fm
Tue Jun 7 11:55:18 EDT 2011 

On Tue, Jun 07, 2011 at 09:47:17AM -0600, Serge Dubrouski wrote:
> On Tue, Jun 7, 2011 at 9:39 AM, Dejan Muhamedagic <dejanmm at fastmail.fm>wrote:
> 
> > Hi,
> >
> > On Tue, Jun 07, 2011 at 08:45:07AM -0600, Serge Dubrouski wrote:
> > > No, RA acts like it should. It can't find necessary software and returns
> > > OCF_NOT_CONFIGURED, all RAs act this way. You have to install all
> > software
> > > used in you cluster on all nodes even if you are not actually planning to
> > > run that software on some of them.
> >
> > This is not so. A resource agents should be able to figure out if
> > there's no software installed and then return NOT_INSTALLED or
> > NOT_RUNNING.
> >
> 
> That changes exit code but doesn't change the requirements to have that
> software installed and able to report that it's down.

If it's not installed, then it cannot run. The difference between
NOT_INSTALLED and NOT_CONFIGURED is that in the former case
pacemaker won't try to start the resource on that node whereas in
the latter it will give up on the resource completely.

Cheers,

Dejan

> > Thanks,
> >
> > Dejan
> >
> > > On Tue, Jun 7, 2011 at 8:02 AM, ruslan usifov <ruslan.usifov at gmail.com
> > >wrote:
> > >
> > > > Thanks fo replay i undestend already this moment. Now i think that this
> > is
> > > > problem of ocf:heartbeat:iSCSITarget RA, which return unproperly return
> > > > code, when no any iscssi target software installed
> > > >
> > > > 2011/6/7 Serge Dubrouski <sergeyfd at gmail.com>
> > > >
> > > >> This questions pops up over and over again. Pacemaker has to make sure
> > > >> that your resources aren't up anywhere in the cluster before start
> > them up
> > > >> on designated nodes. That means that it has to be able to run
> > status/monitor
> > > >> operations for all configured resources on all configured nodes. You
> > can't
> > > >> just add a 3rd quorum node into cluster you have to make sure that all
> > RAs
> > > >> that you use can run on that 3rd node properly.
> > > >>
> > > >> On Tue, Jun 7, 2011 at 1:58 AM, ruslan usifov <
> > ruslan.usifov at gmail.com>wrote:
> > > >>
> > > >>> Hello
> > > >>>
> > > >>> I have 3 node cluster (in future we add another one node) with follow
> > > >>> configuration:
> > > >>>
> > > >>> crm(live)configure# show
> > > >>> node drbd1
> > > >>> node drbd2
> > > >>> node drbd3
> > > >>> primitive drbd_web ocf:linbit:drbd \
> > > >>>         params drbd_resource="web" \
> > > >>>         op monitor interval="10s" timeout="60s"
> > > >>> primitive drbd_web-U ocf:linbit:drbd \
> > > >>>         params drbd_resource="web-U" \
> > > >>>         op monitor interval="10s" timeout="60s"
> > > >>> primitive iscsi_ip_web ocf:heartbeat:IPaddr2 \
> > > >>>         params ip="192.168.19.91" nic="eth1:1" cidr_netmask="24"
> > > >>> primitive iscsi_web_target ocf:heartbeat:iSCSITarget \
> > > >>>         params iqn="iqn.2010-06.playrix.local:san.web" \
> > > >>>         op monitor interval="10s" timeout="30s"
> > > >>> primitive iscsi_web_target_lun0 ocf:heartbeat:iSCSILogicalUnit \
> > > >>>         params lun="0" path="/dev/drbd10"
> > > >>> target_iqn="iqn.2010-06.playrix.local:san.web"
> > > >>> group iscsi_web iscsi_ip_web iscsi_web_target iscsi_web_target_lun0
> > > >>> ms ms_drbd_web drbd_web \
> > > >>>         meta master-max="1" master-node-max="1" clone-max="2"
> > > >>> clone-node-max="1" notify="true" globally-unique="false"
> > > >>> target-role="Started" is-managed="true"
> > > >>> ms ms_drbd_web-U drbd_web-U \
> > > >>>         meta master-max="1" master-node-max="1" clone-max="1"
> > > >>> clone-node-max="1" notify="true" is-managed="true"
> > globally-unique="false"
> > > >>> location ms_drbd_web-U_on_drbd1_or_drbd2 ms_drbd_web-U \
> > > >>>         rule $id="ms_drbd_web-U_on_drbd1_or_drbd2-rule" -inf: #uname
> > ne
> > > >>> drbd1 and #uname ne drbd2
> > > >>> location ms_drbd_web_on_drbd1_or_drbd2 ms_drbd_web \
> > > >>>         rule $id="ms_drbd_web_on_drbd1_or_drbd2-rule" -inf: #uname ne
> > > >>> drbd1 and #uname ne drbd2
> > > >>> colocation drbd_web-U_on_drbd_web inf: ms_drbd_web-U:Master
> > > >>> ms_drbd_web:Master
> > > >>> colocation iscsi_ip_web_on_drbd_web inf: iscsi_ip_web
> > ms_drbd_web:Master
> > > >>> colocation iscsi_web_on_drbd_web-U inf: iscsi_web
> > ms_drbd_web-U:Master
> > > >>> order iscsi_web_after_ms_drbd_web-U inf: ms_drbd_web-U:start
> > iscsi_web
> > > >>> order ms_drbd_web-U_after_iscsi_ip_web inf: iscsi_ip_web:start
> > > >>> ms_drbd_web-U:start
> > > >>> order ms_drbd_web-U_before_ms_drbd_web inf: ms_drbd_web:promote
> > > >>> iscsi_ip_web:start
> > > >>> property $id="cib-bootstrap-options" \
> > > >>>         dc-version="1.0.11-db98485d06ed3fe0fe236509f023e1bd4a5566f1"
> > \
> > > >>>         cluster-infrastructure="openais" \
> > > >>>         expected-quorum-votes="3" \
> > > >>>         stonith-enabled="false" \
> > > >>>         last-lrm-refresh="1307432239" \
> > > >>>         symmetric-cluster="true"
> > > >>>
> > > >>>
> > > >>>
> > > >>> In this configuration i want that all resources ran only on drbd1 and
> > > >>> drb2 nodes. And as i understand wit location constraint i should
> > reach this
> > > >>> objective. And all resource mast run on drbd1 and drbb2 nodes. But i
> > got
> > > >>> follow error:
> > > >>>
> > > >>> Failed actions:
> > > >>>     iscsi_web_target_monitor_0 (node=drbd3, call=5, rc=6,
> > > >>> status=complete): not configured
> > > >>>     iscsi_web_target_lun0_monitor_0 (node=drbd3, call=6, rc=6,
> > > >>> status=complete): not configured
> > > >>>
> > > >>>
> > > >>>
> > > >>> And i confused why drbd3? There is nothing must run o monitored.
> > Please
> > > >>> if it is possible explain this behavior
> > > >>>
> > > >>>
> > > >>>
> > > >>> _______________________________________________
> > > >>> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > > >>> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > > >>>
> > > >>> Project Home: http://www.clusterlabs.org
> > > >>> Getting started:
> > http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > > >>> Bugs:
> > > >>>
> > http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
> > > >>>
> > > >>>
> > > >>
> > > >>
> > > >> --
> > > >> Serge Dubrouski.
> > > >>
> > > >> _______________________________________________
> > > >> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > > >> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > > >>
> > > >> Project Home: http://www.clusterlabs.org
> > > >> Getting started:
> > http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > > >> Bugs:
> > > >>
> > http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
> > > >>
> > > >>
> > > >
> > > > _______________________________________________
> > > > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > > >
> > > > Project Home: http://www.clusterlabs.org
> > > > Getting started:
> > http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > > > Bugs:
> > > >
> > http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
> > > >
> > > >
> > >
> > >
> > > --
> > > Serge Dubrouski.
> >
> > > _______________________________________________
> > > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> > >
> > > Project Home: http://www.clusterlabs.org
> > > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > > Bugs:
> > http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
> >
> >
> > _______________________________________________
> > Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> > http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> >
> > Project Home: http://www.clusterlabs.org
> > Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> > Bugs:
> > http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker
> >
> 
> 
> 
> -- 
> Serge Dubrouski.

> _______________________________________________
> Pacemaker mailing list: Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker
> 
> Project Home: http://www.clusterlabs.org
> Getting started: http://www.clusterlabs.org/doc/Cluster_from_Scratch.pdf
> Bugs: http://developerbugs.linux-foundation.org/enter_bug.cgi?product=Pacemaker

More information about the Pacemaker mailing list