[Pacemaker] Odd cluster constraint behaviour

[Dejan Muhamedagic]

Hi,

On Mon, Jul 06, 2009 at 03:33:13PM +1000, Oliver Hookins wrote:
> I'm not sure if I've configured things correctly, as the last time I did
> this was on Heartbeat 2.0.7 or so. It's either that as a bug (and it's far
> more likely I've stuffed something up):
>  * there are two resource groups, one with higher priority (master) and one with
>    lower priority (slave) - note that I'm not actually configuring them as master/slave resources
>  * two nodes in the cluster (A and B)
>  * they are constrained to run:
>   - only if a pingd instance is successfully running
>   - colocated with -INFINITY to each other (i.e. cannot run together)
>   - in the order of the "master" resource group and then the "slave" resource group
>   - preferring resource group "master" running on node A
> 
> With the cluster in its default running state of "master" on A, and "slave" on B,
> everything seems fine. When I "fail" node A, "slave" stops on node B but then no
> resources are started on node B. It's clearly a conflict of constraints, or
> the resource group priorities being ignored but I can pick it.
> 
> Here are (hopefully) the relevant snippets of CIB:
> 
>     <resources>
>       <group id="master">
>         <meta_attributes id="master-meta_attributes">
>           <nvpair id="master-meta_attributes-priority" name="priority" value="1000"/>
>         </meta_attributes>
> 
>       <group id="slave">
>         <meta_attributes id="slave-meta_attributes">
>           <nvpair id="slave-meta_attributes-priority" name="priority" value="0"/>
>         </meta_attributes>
> 
>       <clone id="pingdclone">
>         <meta_attributes id="pingdclone-meta_attributes">
>           <nvpair id="pingdclone-meta_attributes-globally-unique" name="globally-unique" value="false"/>
>         </meta_attributes>
>         <primitive class="ocf" id="pingd" provider="pacemaker" type="pingd">
>           <instance_attributes id="pingd-instance_attributes">
>             <nvpair id="pingd-instance_attributes-host_list" name="host_list" value="X.X.X.X"/>
>             <nvpair id="pingd-instance_attributes-multiplier" name="multiplier" value="100"/>
>           </instance_attributes>
>           <operations>
>             <op id="pingd-monitor-15s" interval="15s" name="monitor" timeout="5s"/>
>           </operations>
>         </primitive>
>       </clone>
>     </resources>
>     <constraints>
>       <rsc_location id="cli-prefer-master0" node="nodeA" rsc="master" score="1000"/>
>       <rsc_location id="cli-prefer-master1" node="nodeB" rsc="master" score="0"/>
>       <rsc_colocation id="separate_master_and_slave" rsc="master" score="-INFINITY" with-rsc="slave"/>

This colocation should be the other way around, i.e. exchange rsc
and with-rsc attributes. If that doesn't help, please post the
logs.

Thanks,

Dejan

>     </constraints>
> 
> Any help would be appreciated.
> -- 
> Regards,
> Oliver Hookins
> Anchor Systems
> 
> _______________________________________________
> Pacemaker mailing list
> Pacemaker at oss.clusterlabs.org
> http://oss.clusterlabs.org/mailman/listinfo/pacemaker